Carousel lathes

The MSHT®-PL-XL machine protection lift gate is used for clear widths of over 9 meters. The lift gate consists of an additionally reinforced steel structure designed for the increased requirements of up to 16 meters clear width.

The main closing edge is protected by an electrical safety edge connected to the main frame via a trailing cable. The gate leaf can extend beyond the upper edge of the gate portal, so that extremely low construction heights can be realized. A fixed panel to cover the upper gate area is optional.

The MSHT®-PL-2 consists of a sturdy steel construction that results in a portal that is closed at the top. The gate has two driven leaves that open telescopically upwards. This allows for a low overall construction height and minimum space requirements when open, even for large openings.

The closing edge is protected by electrical safety edges connected to the main frame by trailing cables. A fixed panel for covering the upper gate area is optional.

The protective fence system CustomLine Wall from Brühl consists of sheet metal elements and posts that are compatible with all Brühl door products. This stable separating protective device is used in particular where system safety cannot be guaranteed by protective grilles or where other environmental conditions - such as protection against smoke formation, visual, noise or small parts protection - must be taken into account.

High quality
Sheet metal elements are made of lasered and folded sheet metal

Full protection
Visibility protection, splash protection, small parts protection, protection from bright light, smoke, heat, dust, laser, drafts

Vision panel installation
Polycarbonate protective screens, privacy screens and puncture guards can be added

The stable separating safety device consists of fence elements with square profile frames and various infill options. The safety fence system CustomLine Frame is compatible with all Brühl door products. If the risk and hazard assessment indicates that the forces acting on a safety fence are too high, the components of the safety fence are made stronger.

High torsional stiffness/stability
Elements consist of miter-welded profile frames (no open frame profiles) with welded or inserted infills

Pane installation
with clamping brackets, no gluing, easy pane replacement possible

Cutouts
with angle or clamping profile as edge protection