CUSTOMLINE Safety fences

Brühl High Fence is a simple, perfected and flexible fencing system consisting of standard mesh elements and posts that can be combined with the wide range of Brühl doors. The modular concept enables optimum adaptation to a wide variety of operational conditions. A fence height of up to 4835 mm can be achieved by stacking the mesh elements on top of each other.

Captivity of the fastening material
Fastening material remains on the elements with screws

Lattice elements
High stability with low weight. Available in flexible widths.

Post & Base Plate
Optimal stability due to stable four-hole bottom plate. Different
ground clearances are possible.

The FLEX guardrail system ensures maximum safety thanks to DIN EN ISO 14122-3 (Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, ladders and guardrails) in combination with DIN EN ISO 14120 (Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards).

The modular concept allows optimum adaptation to a wide variety of operational conditions, can be individually shortened on site, and is compatible with all Brühl door products. According to DIN EN ISO 14122-3, fall protection is required from a height of 500 mm.

Captivity of the fastening material
Fastening material remains on the elements with screws

High stability with low weight
Lattice elements consist of wires and rounded flat steel

High flatness, optimal process insight
due to frameless design with a slit-shaped opening of 20 × 200 mm

The protective fence system CustomLine Wall from Brühl consists of sheet metal elements and posts that are compatible with all Brühl door products. This stable separating protective device is used in particular where system safety cannot be guaranteed by protective grilles or where other environmental conditions - such as protection against smoke formation, visual, noise or small parts protection - must be taken into account.

High quality
Sheet metal elements are made of lasered and folded sheet metal

Full protection
Visibility protection, splash protection, small parts protection, protection from bright light, smoke, heat, dust, laser, drafts

Vision panel installation
Polycarbonate protective screens, privacy screens and puncture guards can be added

The stable separating safety device consists of fence elements with square profile frames and various infill options. The safety fence system CustomLine Frame is compatible with all Brühl door products. If the risk and hazard assessment indicates that the forces acting on a safety fence are too high, the components of the safety fence are made stronger.

High torsional stiffness/stability
Elements consist of miter-welded profile frames (no open frame profiles) with welded or inserted infills

Pane installation
with clamping brackets, no gluing, easy pane replacement possible

Cutouts
with angle or clamping profile as edge protection

The stainless steel protective fence systems were developed as separating protective devices for special applications. Areas of application can be found in alkaline and acid environments as well as in the food industry (please inquire for modified system). The frameless design of the FLEX stainless steel safety fence system minimizes the deposit areas and thus reduces the possibility of dirt accumulation.

Optimum process insight
due to frameless design in a grid of 20 x 200 mm

Flexible widths
Grids can be easily shortened in width in increments of 23 mm

Safe mounting
Mounting and dismounting is always done from the safe outside of the machine

Brühl's aluminum safety fence system is a stable separating protective device made of standard mesh elements and posts that is compatible with all Brühl door products. With the aluminum protective fence system, we combine the best material properties of steel and aluminum in a continuous protective fence system. The modular concept allows optimum adaptation to a wide variety of operational conditions while ensuring maximum safety.

Maximum impact resistance
Steel posts are sandblasted and powder coated

Captivity of the fastening material
Fastening material remains with the screws on the grid elements

Safe mounting
Mounting and dismounting is always done from the safe outside of the machine

The robust safety fence system as a supplementary modular protective device in accordance with the Machinery Directive 2006/42/EC, DIN EN ISO 12100, ISO 10218-1, ISO 10218-2, DIN EN ISO 13857, DIN EN ISO 14119 and DIN EN ISO 14120. It was primarily developed to protect the danger zones of industrial robots against impacts and material handling losses. "High Resistant" is designed for the increased risk of a mechanical collision between the robot arm and the guarding and can be supplemented or combined with the FLEX and CustomLine Frame safety fence systems in certain areas. If access is unavoidable in the high-risk areas protected by the "High Resistant" safety fence system, Brühl offers special inward-opening sliding doors and inward-opening safety swing doors for this purpose.

Optimum stability
Force-fitted all-round weld seam for connecting base plate and post profile

Captivity of the fastening material
Fastening material remains with the screws on the grid elements

Mechanical stop
L-profile tabs on the inside of the upper protective fence area prevent a grille element panel from being pushed out