- For hinged doors
Wide range of combination options
Thanks to the variety of add-on systems for safety switches, access doors of all types can be combined with different locking or opening options. The right mounting system is available for every application.
Flexible and modularly applicable
Due to their modular design, the various components can be easily replaced at any time (e.g. handles or latches). Simple adjustability of the numerous attachment systems.
Prevention of mechanical tampering
Brühl guards with the corresponding mounting systems are designed to prevent mechanical tampering by users as far as possible.
The BRÜHL-GV handle system is a precisely fitting preparation for mounting compact and multifunctional solenoid interlocks from a wide range of safety switch manufacturers, such as Euchner, Fortress Interlocks, Jakob Safety and Schmersal. Depending on the switch design, product features include an additional mechanical stop to prevent damage to the door and safety switch, robust galvanized surfaces, and precision-fit threads for fast mounting.
The BRÜHL-GRK® mounting system is the standard mounting system for the precise fitting of safety switches on BRÜHL swing doors. The safety switch is mounted from the outside of the machine at the height of the sturdy plastic handle. The system is characterized by an optional ball catch, which is used according to the Brühl product recommendation for safety switches whose latching force is less than 30 N. The add-on system can be used for both right-hinged and left-hinged doors. The BRÜHL handle system can be combined with various manufacturer-independent safety switches. We trust in products of the companies Bernstein, Honeywell, ABB, Pilz, Schmersal, Siemens, Rockwell Automation.
The BRÜHL-HP-F® retaining plate system is supplemented with a lever handle set, handle or bolt according to the access convenience. The safety switch is fixed with the BRÜHL retaining plate system in the upper area of the door leaf on the machine side. The system can be used for both left and right hinged doors. Aluminum plugs are used to prevent tampering. The BRÜHL-HP-F® retaining plate system can be easily combined with type 2 safety switches (with or without solenoid interlock). You can combine our holding plates with safety switches from the manufacturers Bernstein, Comitronic-BTI, Euchner, Honeywell, Leuze electronic, Omron Electronics, Rockwell Automation, Pilz, Schmersal, Sick, Siemens and Telemecanique Sensors.
The bolt pin mechanically guides the actuator when it is retracted into the safety switch. The BRÜHL-RI® bolt system has an integrated random safety device; a pressure spring moves the bolt tongue into the "bolt closed" position without any actuation. Aluminum plugs serve as tamper protection. This system is very robust, low-maintenance and low-cleaning and has proven itself over 30 years in the industrial environment. The BRÜHL-RI® add-on system can be easily combined with safety switches of type 2 (with or without solenoid interlock) from the manufacturers Bernstein, Euchner, Honeywell, Leuze electronic, Pilz, Rockwell Automation, Schmersal, Telemecanique Sensors, Sick and Siemens.
This system is a preparation for safety switches consisting of a combination of safety switch, mounting plates/elements and bolts from a wide range of safety switch manufacturers such as Dold, Euchner, Fortress Interlocks, Pilz or Telemecanique Sensors. With the BRÜHL-RI (RV) system, the safety switch is mounted with an exact fit and thus guarantees a long-lasting latch function. A high installation effort is saved by using standard drilling patterns on BRÜHL hinged doors.
Due to its operating principle, the BRÜHL-SN-F cam system is used exclusively for swing and double doors. This attachment system is very advantageous when very fast plant access is required. This system is combined with two roller plunger switches (type 1) from the companies Bernstein, Euchner, Rockwell Automation, Schmersal or Siemens, which serve a safe two-signal interrogation, which can have a positive effect on the performance level or on the safety category in the context of the risk assessment.
The switch preparation BRÜHL-SV® is mainly used for all BRÜHL doors, if safety switches are prepared in the factory (for quick installation on site) to fit exactly. In this system preparation, the safety switch is function-dependent and can consist, for example, in a hole pattern adaptation on the mullion / door leaf as preparation for an escape release, in special hole pattern and welding substructure adaptations. We offer safety switches from ABB, Bernstein, Euchner, Fortress Interlocks, Leuze electronic, Omron Electronics, Pilz, Rockwell Automation and Schmersal.
The BRÜHL-UER® overlap bolt system prevents the leaves on folding or double leaf doors from being pushed through, allowing the safety distances of the risk and hazard assessment to be maintained. This system is very robust, requires little maintenance or cleaning, and has proven itself over many years in industrial environments. Combinations are possible with a wide range of safety switches - Brühl recommends safety switches from the companies Euchner or Schmersal with a non-contact operating principle as a combination.
The BRÜHL-HP-S® retaining plate system is supplemented with a handle set or a handle according to the access convenience and can be used for both left and right hinged doors. A mechanical stop in the aluminum profile prevents damage to the safety switch and actuator. The position of the safety switch depends on the door type and the sash travel. Retaining plate system BRÜHL-HP-S® can be easily combined with safety switches of type 2 (with or without solenoid interlock) and is offered by the manufacturers Bernstein, Comitronic-BTI, Euchner, Honeywell, Jakob Safety, Leuze electronic, Omron Electronics, Pilz, Rockwell Automation, Schmersal, Telemecanique Sensors, Sick and Siemens.
The mounting plates of the BRÜHL-SN-S trip cam system are rounded laser edge parts made of robust, galvanized steel. The trip cam profile has a powder-coated surface in door color. Two roller lever switches (design 1) for safe two-signal interrogation can be mounted on the trip cam system in a manufacturer-independent and precisely fitting manner, which can have a positive effect on the performance level or on the safety category as part of the risk assessment. Suppliers of suitable safety switches include the companies Bernstein, Euchner, Rockwell Automation, Schmersal, Sick and Siemens.
Robust surface
Our accessories are galvanized according to DIN 50979 or they are sandblasted together with the guard and then powder coated.
Precisely fitting threads
All protective fencing systems are optimally prepared for the desired accessories and guarantee fast assembly - without loss of time on the construction site.
Easy assembly
The accessories are supplied individually in assembly packs with detailed assembly instructions, sorting of parts is not necessary, assembly can be done quickly.
for safeguarding conveyor system inlets and outlets
Depth (mm) Width (mm) PU (pieces) Item no.
1200 900 1 SVGM-1200×900
1200 1200 1 SVGM-1200×1200
incl. fastener and clamping plate
VPE (piece) Item no.
6 BMSV-6
Stable post with base plate for mounting light barriers.
Welded C-profile for height compensation. Height 2600 mm is made with post profile QR80, all other heights with post profile of QR60.
Other versions, e.g. with adjustment, available on request.
Item no.
LSP
The eccentric cable duct holder is knocked into the head end of the post instead of the plastic plug. It can be used for all post types (DP, EP, TP), but is limited to posts with QR50.
The cable duct holder can be installed ex works or on site. A cable duct can be screwed to the cable duct holder via slotted holes. Each holder can bear a load of 50 kg. When installed in corner or T-joint posts, the load capacity is limited to 14 kg.
Advantages:
' Quick installation by hammering into posts
' Integrated potential equalization (created automatically during installation)
' Can be retrofitted to existing systems
Technical data:
Packaging unit: 10 pieces
Fence systems: FLEX, ZAUN II, WAND II (max. system height: 2400 mm)
Load capacity: DP: 50 kg, EP/TP: 14 kg
Usable cable duct widths: Up to 150 mm
Material: Galvanized sheet steel
Colour: Galvanized steel
Potential equalization: Cable duct holder conductively connected to post
The centric cable duct holder is knocked into the head end of the post instead of the plastic plug. It is limited to cable ducts up to 100 mm wide and can be used for all post types (DP, EP, TP) with QR50.
The cable duct holder can be easily installed on site. The cable duct holder is screwed to the cable duct using the self-drilling screw provided. The prerequisite for this is that the cable duct is laid centrally over the post and the fence.
Advantages:
' Quick installation by hammering into posts
' Integrated potential equalization (created automatically during installation)
' Can be retrofitted to existing systems
Technical data:
' Packaging unit: 10
' Fence system (max. system height: 2400 mm): FLEX, FENCE II, WALL II
' Material: Galvanized sheet steel
' Colouring: Galvanized steel
' Potential equalization: Cable duct holder conductively connected to post
The edge protection plate is an accessory for on-site cutouts on FLEX elements. It can be easily and variably mounted on site. The protective solution can be attached to the vertical bars of the FLEX elements using clamping plates. The wire projections for cutouts may be a maximum of 55 mm and a minimum of 37 mm long. All wires of a cut must be covered by the edge protection plate by 36 mm.
The use of aluminum as a material means that the length of the edge protector can be shortened as required without subsequent painting. In addition, further holes can be added on site to individually fasten the edge protection plate.
Technical data:
Aluminum sheet, cut edges must be deburred after cutting to length.
Color: aluminum - raw
Packaging units: 5, 10 (incl. clamping plates and fixing screws)
Dimensions: length 1250 mm
Mounting plate for add-on housing on grid elements incl. mounting material and optionally with drilling screw for fastening to components.
AG-V1: 80 x 155 mm (e.g. for 2-3 pushbuttons)
AG-V2: 80 x 225 mm (e.g. for 4 pushbuttons)
Item no.
AG-V1/V2
Mounting plate for add-on housing on mullions incl. mounting material
AG-V3: 80 x 160 mm (e.g. for 2-3 pushbuttons)
AG-V4: 80 x 225 mm (e.g. for 4 pushbuttons)
Item no.
AG-V3/V4
Bracket for screwing smaller cable ducts to the post, mounting bracket and fastener galvanized steel
VPE (piece) Item no.
10 KKH-V1-10
Bracket for screwing larger cable ducts to the post, mounting bracket and fasteners galvanized steel
VPE (piece) Item no.
10 KKH-V2-10
Screwing of cable ducts to the FLEX II grid element, clamping plate and fastener galvanized steel
VPE (piece) Item no.
10 KKH-V3-10
Bracket for screwing smaller cable ducts to the FLEX II grid element, fastening bracket and fasteners galvanized steel
VPE (piece) Item no.
10 KKH-V4-10
Bracket for screwing larger cable ducts to the FLEX II grid element, fastening bracket and fasteners galvanized steel
VPE (piece) Item no.
10 KKH-V5-10
For mounting on door leaf
Prepared for Euro profile cylinder, ø 17 mm - profile cylinder not included.
VPE (piece) Item no.
1 SG-FEO
For mounting on door leaf
Prepared for Euro profile cylinder, ø 17 mm - profile cylinder not included.
VPE (piece) Item no.
1 SG-S
For mounting on door leaf
Prepared for Euro profile cylinder, ø 17 mm - profile cylinder not included.
VPE (piece) Item no.
1 SG-S2
Door set for double doors with fixed knob outside and handle inside, opening from outside only possible with key
Can be combined only with closed fillings sheet metal/polycarbonate.
Profile cylinder not included in the scope of delivery.
VPE (piece) Item no.
1 TG-V1
Door set for swing and sliding doors with handle inside and outside
Profile cylinder not included in the scope of delivery.
VPE (piece) Item no.
1 TG-V2
Door set for double doors with fixed knob on the outside, a handle on the inside and a handle-through protection, opening from the outside only possible with a key
Profile cylinder not included in the scope of delivery.
VPE (piece) Item no.
1 TG-V5
Plastic handle with mounting plate for mounting on hinged doors
VPE (piece) Item no.
1 TZ-GR-F-V1
on sliding doors with inside-running door leaves
VPE (piece) Item no.
1 TZ-GR-S-V3
Secure locking without query
VPE (piece) Item no.
1 TZ-RI-F-V1
Device against accidental closing of swing doors
VPE (piece) Item no.
1 TZ-ZS-F-V1
Plastic handle with mounting plate and ball catch for mounting on hinged doors
VPE (piece) Item no.
1 TZ-GRK-F-V1
Plastic handle with mounting plate and ball catch for mounting on sliding doors
VPE (piece) Item no.
1 TZ-GRK-S-V1
Support roller for hinged door, mounted position fixed roller
VPE (piece) Item no.
1 STR-F-V1-BR
Support roller for hinged door, mounted position swivel roller
VPE (piece) Item no.
1 STR-F-V1-LR
Euro profile cylinder keyed alike, ø 17 mm, length: 31/31 mm
Profile cylinder keyed alike, cannot be guaranteed when reordering.
VPE (piece) Item no.
1 PZ-V1
Euro profile cylinder not keyed alike, ø 17 mm, length: 31/31 mm
VPE (piece) Item no.
1 PZ-V2
Euro profile cylinder keyed alike, ø 17 mm, length: 30/10 mm
Profile cylinder keyed alike, cannot be guaranteed for repeat orders.
VPE (piece) Item no.
1 PZ-V4
Euro profile cylinder not keyed alike, ø 17 mm, length: 30/10 mm
VPE (piece) Item no.
1 PZ-V5
Euro profile cylinder keyed alike, ø 17 mm, length: 30/65 mm
Profile cylinder keyed alike, cannot be guaranteed for repeat orders.
VPE (piece) Item no.
1 PZ-V6
Euro profile cylinder not keyed alike, ø 17 mm, length: 30/65 mm
VPE (piece) Item no.
1 PZ-V7
for safety switches with escape release
VPE (piece) Item no.
1 DGS-V1
for mounting system HP
VPE (piece) Item no.
1 HP-BW
for mounting on sliding doors HP
VPE (piece) Item no.
1 TZ-HPK-S-V1
For mounting on door leaf
Prepared for Euro profile cylinder, ø 17 mm - profile cylinder not included.
VPE (piece) Item no.
1 SG-F
Threaded plate and fastener steel galvanized
Base plate size PU (piece) Item no.
60 x 130 mm 1 GP-V1-0613
130 x 130 mm 1 GP-V1-1313
70 x 150 mm 1 GP-V1-0715
150 x 150 mm 1 GP-V1-1515
100 x 200 mm 1 GP-V1-1020
200 x 200 mm 1 GP-V1-2020
Mullion support to increase the stability of the mullion, for example for single panels or single doors (not necessary for standard doors)
For each post support, order corresponding ground fastener separately!
Can be used for post profile QR50 and QR60.
Screws for fastening self-tapping.
VPE (piece) Item no.
2 PS-V1-2
Equipotential bonding to prevent electrostatic charging of the protective devices Cross-section 6 mm².
VPE (piece) Item no.
10 PA-V1-10
Equipotential bonding to prevent electrostatic charging of the protective devices Cross-section 16 mm².
VPE (piece) Item no.
10 PA-V2-10
As a pressure plate for adjustment posts or to compensate for slight irregularities
Base plate size PU (piece) Item no.
130 x 130 mm 1 ULP-V1-1313
150 x 150 mm 1 ULP-V1-1515
200 x 200 mm 1 ULP-V1-2020
for magnesite screed floors
Base plate size PU (piece) Item no.
130 x 130 mm 1 ULP-V2-1313
150 x 150 mm 1 ULP-V2-1515
200 x 200 mm 1 ULP-V2-2020
Fix anchor steel galvanized
Thread Length (mm) Qty (pcs.) Item no.
M10 120 10 BMF-10 x 120-10
M12 145 10 BMF-12 x 145-10
M16 130 10 BMF-16 x 130-10
Fix anchor stainless steel
Thread Length (mm) Qty (pcs.) Item no.
M10 120 10 E-BMF-10 x 120-10
Composite anchor steel galvanized
Thread Length (mm) Qty (pcs.) Item no.
M10 130 10 BMV-10 x 130-10
M12 160 10 BMV-12 x 160-10
M16 190 10 BMV-16 x 190-10
Composite anchor stainless steel
Thread Length (mm) Qty (pcs.) Item no.
M10 130 10 E-BMV-10 x 130-10
M12 160 10 E-BMV-12 x 160-10
M16 190 10 E-BMV-16 x 190-10
Galvanized steel hook bolt for fastening to gratings and special connection points
Thread Length (mm) Qty (pcs.) Item no.
M10 90 10 BMH-10 x 90-10
Wood construction screw with plate head steel galvanized for fastening on wooden floors
Thread Length (mm) Qty (pcs.) Item no.
8 50 1 BMT-8 x 50
Straight steel lug and galvanized steel fastener
VPE (piece) Item no.
16 ZL2O-V1-16
Steel lug and fastener steel galvanized
VPE (piece) Item no.
16 ZL2U-V1-16
Bracket in angled design made of steel and fastener steel galvanized
VPE (piece) Item no.
16 ZL2O-V2-16
Edge trim for on-site cutouts as edge protection
on sheet metal elements - clamping range 1-2 mm
VPE (piece) Item no.
(m) KTS-V1
on fence elements - clamping range 1-3 mm
VPE (piece) Item no.
(m) KTS-V2
For sealing between WALL elements and floor.
Other versions available on request
VPE (piece) Item no.
6.5m CPB
Stainless steel lug and fastener
VPE (piece) Item no.
8 E-FL1-V2-8
Strap made of plastic, angle profile and fasteners made of stainless steel
VPE (piece) Item no.
6 E-FL2-V5-6
8 E-FL2-V5-8
10 E-FL2-V5-10
50 E-FL2-V5-50
Plastic lug, stainless steel angle profile and fastener with impact star
VPE (piece) Item no.
10 E-FL2-V9-10
Plastic lug and spacer plate, stainless steel angle profile and fasteners
VPE (piece) Item no.
5 E-FL2DP-V3-5
Stainless steel flex angles and fasteners
VPE (piece) Item no.
5 E-FL1W-V1-5
Straight design lug and stainless steel fastener
VPE (piece) Item no.
16 E-ZL2O-V1-16
Bracket in angled design and stainless steel fastener
VPE (piece) Item no.
16 E-ZL2O-V2-16
Stainless steel lug and fastener
VPE (piece) Item no.
16 E-ZL2U-V1-16
Bracket and fastener steel galvanized
Angular position can be changed by bending inwards: up to 90°; outwards: up to 45°.
VPE (piece) Item no.
8 FL1-V2-8
Bracket and fastener steel galvanized
Angular position changeable by bending outward: up to 45°.
VPE (piece) Item no.
5 FL1-V3-5
Plastic lug, angle profile and fastener galvanized steel
VPE (piece) Item no.
6 FL2-V5-6
8 FL2-V5-8
10 FL2-V5-10
50 FL2-V5-50
Plastic lug, angle profile and fastener steel galvanized with impact star
VPE (piece) Item no.
10 FL2-V9-10
Plastic lug and spacer plate, angle profile and fasteners galvanized steel
VPE (piece) Item no.
5 FL2DP-V3-5
Plastic bracket and spacer plate, galvanized steel angle profile and fasteners.
Double bracket for fastening FLEX mesh elements to a steel post as a fall
safety system or as an alternative to FL2-V5 for higher loads.
VPE (piece) Item no.
10 FL2-V7-10
50 FL2-V7-50
Plastic lug with angle profile and fastener
VPE (piece) Item no.
6 FL2-V6-6
8 FL2-V6-8
10 FL2-V6-10
50 FL2-V6-50
Flex angle and fasteners steel galvanized
PU (piece) Item no.
5 FL1W-V1-5
Connecting element for joining FLEX II lattice elements with polycarbonate
Note that between the lattice element and the post is not polycarbonate overlay.
No captivity of the fasteners is given.
VPE (piece) Item no.
6 SF2-PCV-6
8 SF2-PCV-8
10 SF2-PCV-10
Spacer washer with hexagon screw and washer for mounting on grating elements in narrow places or for frontal mounting of grating elements on machines/plants without further lateral fastening.
VPE (piece) Item no.
5 FL2DP-V2-5
