- Custom doors
The container changing system from Brühl is used to safely accommodate predefined load carriers such as pallets and mesh boxes. It is individually adapted to the existing shelving system.
Alternately closing foil curtain
When opened to the front, the curtain closes the changing zone to the rear and thus access to the danger zone.
Convenient operation
thanks to ergonomic double handle, weight compensation and end position damping.
Universally applicable
Shelf or floor-level design possible
The lifting field is opened and closed by hand. It consists of a sturdy steel construction with concealed weight. The lifting section has mounting plates for the position switches and rails for adjustment. A safety device is provided in the form of a drop guard over several load-bearing elements.
Low installation depth
The lifting panels move horizontally and therefore have a very low installation depth.
Convenient operation
The optional linear guide makes the lift panels particularly smooth-running and very convenient to operate.
No risk of injury
At Brühl, safety is a top priority. The lifting panels are all supplied with a covered gear wheel.
The lifting field is opened and closed by hand. It consists of a sturdy steel construction with concealed weight. The lifting section has mounting plates for the position switches and rails for adjustment. A safety device is provided in the form of a drop guard over several load-bearing elements.
Convenient operation
The optional linear guide makes the lift panels particularly smooth-running and very convenient to operate.
No risk of injury
At Brühl, safety is a top priority. The lifting panels are all supplied with a covered gear wheel.
Extensive safety equipment
The lifting bays are equipped with several load-bearing devices for optimum safety.
Folding panels are available as stand-alone constructions with posts or can be integrated into our protective fence systems in the form of a fence panel. Applications can be found wherever isolated maintenance and adjustment activities on machines and plants can be carried out without complete dismantling of the fence system.
Flexible planning
The fence course can be installed at any angle. This has a positive influence on the assembly time and flexibility on the construction site.
Fast assembly
Brühl folding panels are very stable and guarantee fast assembly - without loss of time on the construction site.
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Folding panels are available as stand-alone constructions with posts or can be integrated into our protective fence systems in the form of a fence panel. Applications can be found wherever isolated maintenance and adjustment activities on machines and plants can be carried out without complete dismantling of the fence system.
Fast assembly
Brühl folding panels are very stable and guarantee fast assembly - without loss of time on the construction site.
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Maximum impact resistance
All elements are sandblasted and powder coated.
The folding wing doors of the FAFTR / DFAFTR type are designed as bolt doors. These doors do not have any guide elements inside the clear opening. The areas of application of the folding wing doors are to be found in highly restricted opening and travel paths.
Fast assembly
Brühl doors are very stable and guarantee fast assembly - without loss of time on the construction site.
For large openings
Minimum space requirement when open - even for large openings.
Convenient operation
The sliding doors are equipped with a smooth-running steel guide profile.
The folding wing doors of the FAFTR / DFAFTR type are designed as bolt doors. These doors do not have any guide elements inside the clear opening. The areas of application of the folding wing doors are to be found in highly restricted opening and travel paths.
Safe movement of the blades
Robust stops due to stoppers and infeed centering.
Different ground clearances
The doors are supplied with 175 mm or 20 mm ground clearance as standard.
Flexible planning
The door jambs are prepared for a passage as well as a corner situation. This has a positive influence on the assembly time and flexibility on the construction site.
The folding sliding doors of the FASTG / DFASTG type are designed as handle doors. With these doors, the leaves are guided in a stable steel guide unit, resulting in precise travel.
Safe movement of the blades
Robust stops due to stoppers and infeed centering.
Different ground clearances
The doors are supplied with 175 mm or 20 mm ground clearance as standard.
Flexible planning
The door jambs are prepared for a passage as well as a corner situation. This has a positive influence on the assembly time and flexibility on the construction site.
The folding sliding doors of the FASTG / DFASTG type are designed as handle doors. With these doors, the leaves are guided in a stable steel guide unit, resulting in precise travel.
Compatible
The folding leaf and folding sliding doors are compatible with the Brühl mounting systems for safety switches.
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Maximum impact resistance
All elements are sandblasted and powder coated.
The door leaves are used in opening areas for machine and plant access. The frame elements of the door leaf are miter welded together and can be equipped with different fillings.
Integration
The door leaves can be integrated into any access of machines or plants where fastening possibilities are available by design. This enables a uniform image for the entire fence run.
Different ground clearances
All doors are supplied with 175 or 20 mm ground clearance as standard.
Compatible
The door leaves are compatible with the Brühl mounting systems for safety switches.
Swing doors can be used in working and hazardous areas of machines with low overtravel and high access frequency by operating personnel. Typical applications include rotary and turning tables as well as assembly lines.
High stability
Robust and durable hinges designed according to the size.
Fast access
Fast access to the machine area is guaranteed.
Individuality
Individual contour adaptation to the machine is possible.
Swing doors can be used in working and hazardous areas of machines with low overtravel and high access frequency by operating personnel. Typical applications include rotary and turning tables as well as assembly lines.
Fast assembly
Brühl doors are very stable and guarantee fast assembly - without loss of time on the construction site.
Maximum impact resistance
All elements are sandblasted and powder coated.
Fast access
Fast access to the machine area is guaranteed.
As a further module to our system fences, we offer our customers self-supporting sliding doors in various designs, where widths of up to 4 m can be realized. The typical areas of application for cantilever sliding doors can be found wherever no guide elements may be present in the opening area (e.g. in crane guidance areas or for material supply and removal by forklift trucks).
No interfering guide elements
No guide elements on the floor or above the clear opening. Smooth-running, durable guide elements. Precise ball carriage guidance optionally possible.
Suitable for large openings
Suitable for securing openings up to 8 m due to the counter-rotating arrangement of two cantilevered sliding doors. Double-leaf design can be realized for bridging large openings.
Fast assembly
Brühl doors are very stable and guarantee fast assembly, as they are completely pre-assembled - without any loss of time on the construction site.
As a further module to our system fences, we offer our customers self-supporting sliding panels in various designs, with which widths of up to 1.5 m can be realized. The typical areas of application for self-supporting sliding panels are wherever no guide elements may be present in the opening area (e.g. in crane guidance areas or for material feed and removal by forklift trucks).
Quick assembly
Brühl panels are very stable and guarantee fast installation, as they are completely pre-assembled - without wasting time on site.
Simple height adjustment
The height of the guide unit can be adjusted quickly using set screws.
Maximum impact resistance
All elements are sandblasted and powder coated.
As a further module to our system fences, we offer our customers self-supporting sliding doors in various designs, where widths of up to 4 m can be realized. The typical areas of application for cantilever sliding doors can be found wherever no guide elements may be present in the opening area (e.g. in crane guidance areas or for material supply and removal by forklift trucks).
Simple height adjustment
The height of the guide unit can be adjusted quickly using set screws.
Maximum impact resistance
All elements are sandblasted and powder coated.
Flexible planning
The door jambs are prepared for a passage as well as a corner situation. This has a positive influence on the assembly time and flexibility on the construction site.
As a further module to our system fences, we offer our customers self-supporting sliding doors in various designs, where widths of up to 4 m can be realized. The typical areas of application for cantilever sliding doors can be found wherever no guide elements may be present in the opening area (e.g. in crane guidance areas or for material supply and removal by forklift trucks).
Low space requirement
Types FSTST/FSTGT are equipped with a telescopic sash guide to minimize the overall space requirement. To further reduce space requirements, the double-leaf type FSTG-2/FSTS-2 is used.
Customized solutions
Customized designs are possible depending on requirements - in different colors and with hot-dip galvanizing. Unsupported sliding doors are available in combination with our mounting systems for safety switches.
No interfering guide elements
No guide elements on the floor or above the clear opening. Smooth-running, durable guide elements. Precise ball carriage guidance optionally possible.
As a further module to our system fences, we offer our customers self-supporting sliding doors in various designs, where widths of up to 4 m can be realized. The typical areas of application for cantilever sliding doors can be found wherever no guide elements may be present in the opening area (e.g. in crane guidance areas or for material supply and removal by forklift trucks).
Suitable for large openings
Suitable for securing openings up to 8 m due to the counter-rotating arrangement of two cantilevered sliding doors. Double-leaf design can be realized for bridging large openings.
Fast assembly
Brühl doors are very stable and guarantee fast assembly, as they are completely pre-assembled - without any loss of time on the construction site.
Simple height adjustment
The height of the guide unit can be adjusted quickly using set screws.
As a further module to our system fences, we offer our customers self-supporting sliding doors in various designs, where widths of up to 4 m can be realized. The typical areas of application for cantilever sliding doors can be found wherever no guide elements may be present in the opening area (e.g. in crane guidance areas or for material supply and removal by forklift trucks).
Maximum impact resistance
All elements are sandblasted and powder coated.
Flexible planning
The door jambs are prepared for a passage as well as a corner situation. This has a positive influence on the assembly time and flexibility on the construction site.
Low space requirement
Types FSTST/FSTGT are equipped with a telescopic sash guide to minimize the overall space requirement. To further reduce space requirements, the double-leaf type FSTG-2/FSTS-2 is used.
As a further module to our system fences, we offer our customers self-supporting sliding doors in various designs, where widths of up to 4 m can be realized. The typical areas of application for cantilever sliding doors can be found wherever no guide elements may be present in the opening area (e.g. in crane guidance areas or for material supply and removal by forklift trucks).
Customized solutions
Customized designs are possible depending on requirements - in different colors and with hot-dip galvanizing. Unsupported sliding doors are available in combination with our mounting systems for safety switches.
No interfering guide elements
No guide elements on the floor or above the clear opening. Smooth-running, durable guide elements. Precise ball carriage guidance optionally possible.
Suitable for large openings
Suitable for securing openings up to 8 m due to the counter-rotating arrangement of two cantilevered sliding doors. Double-leaf design can be realized for bridging large openings.
The sliding doors telescopic are equipped with a special aluminum profile, which provides very precise travel. The wings are arranged in parallel in the guide profiles and can be opened to the left or right outside the clear width. The jambs of this door are made of a sturdy steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation.
Different ground clearances
All sliding doors are supplied with 175 mm or 20 mm ground clearance as standard.
Convenient operation
The standard version contains a precise aluminum guide profile - optionally also combinable with steel guide profile.
Suitable for large openings
The sliding doors of the STT type can be opened completely to outside the clear width.
The sliding doors opening on both sides and telescopic are equipped with a steel guide profile, which ensures very precise travel. The door jambs of this door are made of a stable steel profile with welded four-hole bottom plate. As a standard, both jambs are prepared for a corner and passage situation. The leaves are arranged in parallel in the guide profiles and can be opened to the left or right outside the clear width.
Low space requirement
This design receives a telescopic sash guide to minimize the overall space requirement, with maximum opening width.
Flexible planning
The door jambs are prepared for a passage as well as a corner situation. This has a positive influence on the assembly time and flexibility on the construction site.
Fast assembly
Brühl doors are very stable and guarantee fast assembly - without loss of time on the construction site.
The telescopic double sliding doors are equipped with a special aluminum profile, which provides very precise travel. The door leaves of the door can be opened to the left and right outside the clear width. The door jambs are made of a sturdy steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation.
Simple height adjustment
The height of the guide unit can be adjusted quickly using set screws.
Maximum impact resistance
All elements are sandblasted and powder coated.
Customized solutions
Customized design is possible according to requirements - in different colors and with hot-dip galvanizing. Telescopic sliding doors are available in combination with our add-on systems for safety switches.
To guarantee effective workflows for our customers, we rely on customer-specific solutions. Therefore, we have developed a wide range of sliding doors to optimally meet individual production processes. All doors can be integrated into our safety fence systems as modules with the corresponding frame filling and are available in any color. Deviating special sizes and designs are available on request.
Convenient operation
The standard version contains a precise aluminum guide profile - optionally also as a steel guide profile.
Safe movement of the blades
Robust stops due to stoppers and infeed centering.
Fast assembly
Brühl sliding doors are very stable and guarantee fast assembly - without wasting time on site.
The special aluminum profile, durable steel rollers and a polyamide guide guarantee very smooth and accurate opening and closing of the door leaf. The door leaf is designed to run internally and is used, for example, if a switch cabinet is attached to the outside of the safety guard in the return path or if there is a storage space for a pallet there.
Different ground clearances
All sliding doors are supplied with 175 mm or 20 mm ground clearance as standard.
Flexible planning
The door jambs are prepared for a passage as well as a corner situation. This has a positive influence on the assembly time and flexibility on the construction site.
Compatible
The sliding doors are compatible with the Brühl mounting systems for safety switches.
To guarantee effective workflows for our customers, we rely on customer-specific solutions. Therefore, we have developed a wide range of sliding doors to optimally meet individual production processes. All doors can be integrated into our safety fence systems as modules with the corresponding frame filling and are available in any color. Deviating special sizes and designs are available on request.
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Maximum impact resistance
All elements are sandblasted and powder coated.
Safe movement of the blades
Robust stops due to stoppers and infeed centering.
To guarantee effective workflows for our customers, we rely on customer-specific solutions. Therefore, we have developed a wide range of sliding doors to optimally meet individual production processes. All doors can be integrated into our safety fence systems as modules with the corresponding frame filling and are available in any color. Deviating special sizes and designs are available on request.
Convenient operation
The standard version contains a precise aluminum guide profile - optionally also as a steel guide profile.
Compatible
The sliding doors are compatible with the Brühl mounting systems for safety switches.
Different ground clearances
All sliding doors are supplied with 175 mm or 20 mm ground clearance as standard.
To guarantee effective workflows for our customers, we rely on customer-specific solutions. Therefore, we have developed a wide range of sliding doors to optimally meet individual production processes. All doors can be integrated into our safety fence systems as modules with the corresponding frame filling and are available in any color. Deviating special sizes and designs are available on request.
Fast assembly
Brühl sliding doors are very stable and guarantee fast assembly - without wasting time on site.
Flexible planning
The door jambs are prepared for a passage as well as a corner situation. This has a positive influence on the assembly time and flexibility on the construction site.
Maximum impact resistance
All elements are sandblasted and powder coated.
To guarantee effective workflows for our customers, we rely on customer-specific solutions. Therefore, we have developed a wide range of sliding doors to optimally meet individual production processes. All doors can be integrated into our safety fence systems as modules with the corresponding frame filling and are available in any color. Deviating special sizes and designs are available on request.
Safe movement of the blades
Robust stops due to stoppers and infeed centering.
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Different ground clearances
All sliding doors are supplied with 175 mm or 20 mm ground clearance as standard.
The posts of the swing door alternate side are made of a stable steel profile with welded four-hole bottom plate. By default, both door jambs are prepared for a corner and passage situation. The screw-on hinges allow you to change the hinge direction at any time. The FTW design is particularly flexible and compatible with any attachment system for swing doors.
Fast assembly
Brühl casement doors are very stable and guarantee fast assembly - without loss of time on the construction site.
Flexible planning
The fence course can be installed at any angle. This has a positive influence on the assembly time and flexibility on the construction site.
Large opening
The swing doors can be opened up to 180°.
The jambs of the swing door are made of a sturdy steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation. Due to the stable welded hinges, an opening width of up to 3000 mm is realized.
Compatible
All hinged doors are available in combination with our mounting systems for safety switches.
Dismountable mounting aid
No disturbing elements within the opening area.
Different ground clearances
All gullwing doors are supplied with 175 mm or 20 mm ground clearance as standard.
The jambs of the hinged door with skylight are made of a sturdy steel profile with welded four-hole bottom plate. By default, both door jambs are prepared for a corner and passage situation. The screw-on hinges allow you to change the hinge direction at any time. The FTWO design is particularly flexible and compatible with any attachment system for swing doors. Both mullions are connected by a transom profile and a transom mesh.
Maximum impact resistance
All elements are sandblasted and powder coated
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Easy height adjustment
A height adjustment for uneven ground for easy alignment of the posts is optionally available.
The mullions of the portal wing doors are connected by a welded steel profile. By default, both door jambs are prepared for a corner and passage situation. The screw-on hinges allow you to change the stop direction at any time.
Fast assembly
Brühl casement doors are very stable and guarantee fast assembly - without loss of time on the construction site.
Dismountable mounting aid
No disturbing elements within the opening area.
Easy height adjustment
A height adjustment for uneven ground for easy alignment of the posts is optionally available.
The jambs of the inward opening swing door are made of a sturdy steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation. The door leaf is designed to open inwards.
Different ground clearances
All gullwing doors are supplied with 175 mm or 20 mm ground clearance as standard.
Large opening
The swing doors can be opened up to 180°.
Flexible planning
The fence course can be installed at any angle. This has a positive influence on the assembly time and flexibility on the construction site.
The stop posts of the double wing door consist of a stable steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation. Due to the stable welded hinges, an opening width of up to 4000 mm is realized.
Compatible
All hinged doors are available in combination with our mounting systems for safety switches.
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Maximum impact resistance
All elements are sandblasted and powder coated.
The jambs of the double-wing door with skylight consist of a stable steel profile with welded four-hole bottom plate. Both jambs are connected by a transom profile and a skylight mesh. As a standard, both door jambs are prepared for a corner and passage situation. Due to the welded hinges, an opening width of up to 2800 mm is realized.
Large opening
The swing doors can be opened up to 180°.
Customized solutions
Depending on the requirements, an individual design is possible - in different colors and with hot-dip galvanizing.
Easy height adjustment
A height adjustment for uneven ground for easy alignment of the posts is optionally available.
