SpeedLine® machine safety gates

The MSRT-SL® roller shutter with its classic design (downward closing) offers the highest running speeds for the shortest cycle times. With an opening speed of up to 2.0 m/s and a closing speed of 1.6 m/s, the MSRT®-SL offers the highest possible speeds within the entire SpeedLine® series.

The heavy-duty, tear-resistant special treatment material (Brühl-TEX-I) provides secure restraint (in accordance with DIN EN 14120:2016, C.2.5.1). Forces of up to 150 joules are reliably absorbed. The polyester monofilament fabric coated on both sides with PVC is depressed by a maximum of 200 mm under this force. The fabric material even withstands loads of up to 1200 joules with a sharp-edged profile.

The upward-closing SpeedLine® Bottom machine safety roll-up door has no disturbing limitation of the door opening in height. Ideal for use on manipulators and loading and unloading stations for crane or robot systems. The wrap-around box with its compact design height allows the door to be opened to just 550 mm above the floor.

The heavy-duty, tear-resistant special treatment material (Brühl-TEX-I) provides secure restraint (in accordance with DIN EN 14120:2016, C.2.5.1). Forces of up to 150 joules are reliably absorbed. The polyester monofilament fabric coated on both sides with PVC is depressed by a maximum of 200 mm under this force. The fabric material even withstands loads of up to 1200 joules with a sharp-edged profile without damage.

The MSRT®-SL-A with aluminum slats is used in systems that do not permit deflection of the curtain because a danger point is located directly behind the door curtain.

The aluminum lamella used is double-walled and light-tight. This makes it suitable for use in laser systems. The louvers can withstand an impact of 1700 joules without any measurable deformation. For process insight, the same lamella is available with viewing fields.

The MSHT®-SL lifting gate sets completely new standards in terms of speed for lifting gates. With the integrated light curtain (SLB®), speeds of up to 1.2 m/s can be achieved during opening and 1.0 m/s during closing.

In addition to the fall protection in the motor gearbox (ULD®), the counterweights running in the gate portal provide additional drop protection for the gate leaf. This means that the MSHT®-SL offers you maximum safety for your process. The gate wing is driven by a drive shaft in the gate head and roller chains on both sides.

Due to the variety of different fillings of the gate wings as well as a powder coating in all available RAL color shades, you have a wide range of design options.