The SMV is particularly suitable as a highly flexible, adaptable safety guard. It offers process visibility and optimum protection thanks to polycarbonate panes or FLEX mats.

The entire system is available in pre-assembled standard components. However, the modular design means that customer requirements can be met by shortening the width and height of posts, bays and doors individually on site. Assembly is quick and easy. Depending on customer requirements, a mounting rail can be attached above the FLEX mat, which is connected to the post. Like the frame panels, this offers a profile groove for additional mounting options. With the mounting rail, the ground clearance of the system is reduced from 175 mm to 118 mm.

Posts and doors consist of sturdy 3-groove profiles (groove width 8 mm), which can be used for add-on parts. Only one mullion is required for the system, which can be used as an inside and outside corner, as well as a through or T-jamb. The external dimensions of the post profile are 60 mm x 60 mm. The cut-to-size length is the respective system height. The three-slot profile allows the feet to be fixed in different positions.

Thanks to the modular principle, there are many expansion and replacement options. This means that the SMV can also be variably combined with the FLEX system. With just two profiles, all products can be configured with the corresponding accessories in the same way as the familiar aluminum system profiles. The SMV can be upgraded to a higher safety level (fall protection in accordance with DIN EN ISO 14122-3).