Close
Close video
The telescopic double sliding doors are equipped with a special aluminum profile, which provides very precise travel. The door leaves of the door can be opened to the left and right outside the clear width. The door jambs are made of a sturdy steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation.
Simple height adjustment
The height of the guide unit can be adjusted quickly using set screws.
Maximum impact resistance
All elements are sandblasted and powder coated.
Customized solutions
Customized design is possible according to requirements - in different colors and with hot-dip galvanizing. Telescopic sliding doors are available in combination with our add-on systems for safety switches.
The MSST®-PL-D sliding gate closes with two counter-rotating gate wings from the left and right towards the center of the opening. Its steel construction represents a portal closed at the top, which in combination with the four floor plates has an extremely firm stand on the ground. Thus, a clear width of up to four meters is available.
Both the drive unit with gear motor and roller chain and the safety switch are completely housed in the door head. The ground clearance can be individually designed within the standard specifications.
The main closing edges are protected by electric safety edges connected to the main frame via energy guiding chains. The sliding gate is available with multiple leaves on request.
The stable separating safety device consists of fence elements with square profile frames and various infill options. The safety fence system CustomLine Frame is compatible with all Brühl door products. If the risk and hazard assessment indicates that the forces acting on a safety fence are too high, the components of the safety fence are made stronger.
High torsional stiffness/stability
Elements consist of miter-welded profile frames (no open frame profiles) with welded or inserted infills
Pane installation
with clamping brackets, no gluing, easy pane replacement possible
Cutouts
with angle or clamping profile as edge protection
