Close
Close video
The telescopic double sliding doors are equipped with a special aluminum profile, which provides very precise travel. The door leaves of the door can be opened to the left and right outside the clear width. The door jambs are made of a sturdy steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation.
Simple height adjustment
The height of the guide unit can be adjusted quickly using set screws.
Maximum impact resistance
All elements are sandblasted and powder coated.
Customized solutions
Customized design is possible according to requirements - in different colors and with hot-dip galvanizing. Telescopic sliding doors are available in combination with our add-on systems for safety switches.
The MSST®-PL-2-F cantilever sliding gate is the double-leaf version of the MSST®-PL sliding gate. This gate represents an extremely compact design of a sliding gate without a portal frame. The telescopic gate leaves provide a large closing range and compact dimensions when open. Both the drive unit with gear motor and roller chain and the safety switch are completely housed in the gate base.
The sliding gate is available with closing direction on the left and with closing direction on the right and with width up to five meters.
With its construction without a portal, this type of gate offers an ideal solution of protection at walk-in plant stations with crane or manipulator loading.
The main closing edges are protected with electric safety edges, which are connected to the main frame of the door via energy guiding chains. Optionally, the rear side secondary closing edges are also available with electrical safety edges.
Brühl's aluminum safety fence system is a stable separating protective device made of standard mesh elements and posts that is compatible with all Brühl door products. With the aluminum protective fence system, we combine the best material properties of steel and aluminum in a continuous protective fence system. The modular concept allows optimum adaptation to a wide variety of operational conditions while ensuring maximum safety.
Maximum impact resistance
Steel posts are sandblasted and powder coated
Captivity of the fastening material
Fastening material remains with the screws on the grid elements
Safe mounting
Mounting and dismounting is always done from the safe outside of the machine
