Close
Close video
The telescopic double sliding doors are equipped with a special aluminum profile, which provides very precise travel. The door leaves of the door can be opened to the left and right outside the clear width. The door jambs are made of a sturdy steel profile with welded four-hole bottom plate. As standard, both door jambs are prepared for a corner and passage situation.
Simple height adjustment
The height of the guide unit can be adjusted quickly using set screws.
Maximum impact resistance
All elements are sandblasted and powder coated.
Customized solutions
Customized design is possible according to requirements - in different colors and with hot-dip galvanizing. Telescopic sliding doors are available in combination with our add-on systems for safety switches.
The posts of the swing door alternate side are made of a stable steel profile with welded four-hole bottom plate. By default, both door jambs are prepared for a corner and passage situation. The screw-on hinges allow you to change the hinge direction at any time. The FTW design is particularly flexible and compatible with any attachment system for swing doors.
Fast assembly
Brühl casement doors are very stable and guarantee fast assembly - without loss of time on the construction site.
Flexible planning
The fence course can be installed at any angle. This has a positive influence on the assembly time and flexibility on the construction site.
Large opening
The swing doors can be opened up to 180°.
The stable separating safety device consists of fence elements with square profile frames and various infill options. The safety fence system CustomLine Frame is compatible with all Brühl door products. If the risk and hazard assessment indicates that the forces acting on a safety fence are too high, the components of the safety fence are made stronger.
High torsional stiffness/stability
Elements consist of miter-welded profile frames (no open frame profiles) with welded or inserted infills
Pane installation
with clamping brackets, no gluing, easy pane replacement possible
Cutouts
with angle or clamping profile as edge protection
