Close
Close video
The MSST®-PL-B sliding gate on both sides is equipped with two gate wings that can be moved separately via two separate drives. Thus, the left and right gate openings can be opened and closed independently of each other. With the continuous gate head sill, the gate represents an upwardly closed portal. The drive units with gear motors and roller chains as well as the safety switches are completely housed in the door head. With the four base plates, the door has a firm footing on the ground and the ground clearance can be individually designed within the standard specifications.
The main closing edges are protected by electric safety edges connected to the main frame via energy guiding chains.
The MSHT®-PL-I is designed for integration into machines, presses, and material loading and unloading stations. This design also consists of a sturdy steel structure, which is a gantry closed at the top. The gate has a driven wing that closes from top to bottom.
The closing edge is protected by an electrical safety edge or optionally by a safety light curtain. A variety of motor attachment and mounting options for the door allow for individual design. A fixed panel for covering the upper door area is optional.
The stable separating safety device consists of fence elements with square profile frames and various infill options. The safety fence system CustomLine Frame is compatible with all Brühl door products. If the risk and hazard assessment indicates that the forces acting on a safety fence are too high, the components of the safety fence are made stronger.
High torsional stiffness/stability
Elements consist of miter-welded profile frames (no open frame profiles) with welded or inserted infills
Pane installation
with clamping brackets, no gluing, easy pane replacement possible
Cutouts
with angle or clamping profile as edge protection
