Safety fence system stainless steel

The stainless steel fence systems have been developed as guards for special applications. Areas of application can be found in alkaline and acid environments as well as in the food industry (please ask for a modified system). The frameless construction of the FLEX II stainless steel fence system minimizes the deposits and reduces the possibility of dirt accumulation.

The advantages of stainless steel FLEX II at a glance:

  • The mesh mats are made of wires and rods that provide high stability with the lowest possible weight.
  • The mats can be shortened in the grid of 23 mm in width.
  • The assembly and disassembly takes place from the safe outer side of the machine.
  • The fence can be mounted at any angle.
  • This has a positive influence on the assembly time and the flexibility on the construction site.
  • The captivity required by law of the fastener is met. The tabs remain with the screws on the grid elements - nothing is lost.
  • Very good process insight due to frameless design in a grid of 20 x 200 mm..
  • Depending on requirements, the stainless steel safety fence system can be extended to a customer-specific complete solution through additional components (e.g. through double doors, sliding doors, lift gates, swing doors, platforms, etc.).
  • Modern design through flush fence - posts are not covered by grid elements.

The advantages of stainless steel ZAUN II at a glance:

  • The elements consist of profile frames with welded or inserted fillings.
  • The assembly and disassembly takes place from the safe outer side of the machine.
  • The captivity required by law of the fastener is met. The tabs remain with the screws on the grid elements - nothing is lost.
  • The safety fence system is available in different ground clearance (standard: 175 mm / reduced ground clearance: 20 mm).
  • Modern design with a flush fence: posts are not covered by lattice mats.
  • Attachment tabs for captivation are also available separately in the set.
  • The elements of the protective fence systems are stained.

Overview

Overview posts

Frame filling

FLEX II

Wavy grate 40

Polycarbonate

References

Thanks to our height-adjustable posts, small bumps in the ground can be easily compensated

The deposit areas are minimized in the frameless design of the stainless steel FLEX II protective fence system

Stainless steel protective fence systems in the application of the food industry

Due to the frameless system adjustments can be made without any problems

Technical data

2006/42/EG

DIN EN ISO 12100

DIN EN ISO 13857

DIN EN ISO 14119

DIN EN ISO 14120

 

Accessories

Stainless steel FLEX II strap with captive hexagon screw

To accessories