Close
Close video
The classic MSHT®-PL machine protection lift gate with its steel construction represents a portal closed at the top. Depending on the opening width, the MSHT®-PL is equipped with three to five roller chain sets and is available with a width of up to 9 meters.
The main closing edge is protected by an electrical safety edge connected to the main frame via a trailing cable. The gate leaf can extend beyond the upper edge of the gate portal, so that extremely low construction heights can be realized. A fixed panel to cover the upper gate area is optional.
The MSHT®-PL-XL machine protection lift gate is used for clear widths of over 9 meters. The lift gate consists of an additionally reinforced steel structure designed for the increased requirements of up to 16 meters clear width.
The main closing edge is protected by an electrical safety edge connected to the main frame via a trailing cable. The gate leaf can extend beyond the upper edge of the gate portal, so that extremely low construction heights can be realized. A fixed panel to cover the upper gate area is optional.
Brühl's CustomLine Wall protective fence system consists of sheet metal elements and posts that are compatible with all Brühl door products. This stable separating protective device is used in particular where plant safety cannot be guaranteed by protective grids or where other environmental conditions - such as protection against smoke formation, visual, acoustic or small parts protection - must be taken into account.
High quality
Sheet metal elements are made of lasered and folded sheet metal
Full protection
Visibility protection, splash protection, small parts protection, protection from bright light, smoke, heat, dust, laser, drafts
Vision panel installation
Polycarbonate protective screens, privacy screens and puncture guards can be added
The stable separating protective device consists of fence elements with square profile frames and different infill variants. The CustomLine Frame safety fence system is compatible with all Brühl door products. If, on the basis of the risk and hazard assessment, an excessively high force impact on a protective fence can be derived, the components of the protective fence are made stronger.
High torsional stiffness/stability
Elements consist of miter-welded profile frames (no open frame profiles) with welded or inserted infills
Pane installation
with clamping brackets, no gluing, easy pane replacement possible
Cutouts
with angle or clamping profile as edge protection
