Close
Close video
The posts of the swing door alternate side are made of a stable steel profile with welded four-hole bottom plate. By default, both door jambs are prepared for a corner and passage situation. The screw-on hinges allow you to change the hinge direction at any time. The FTW design is particularly flexible and compatible with any attachment system for swing doors.
Fast assembly
Brühl casement doors are very stable and guarantee fast assembly - without loss of time on the construction site.
Flexible planning
The fence course can be installed at any angle. This has a positive influence on the assembly time and flexibility on the construction site.
Large opening
The swing doors can be opened up to 180°.
The stable separating protective device consists of fence elements with square profile frames and different infill variants. The CustomLine Frame safety fence system is compatible with all Brühl door products. If, on the basis of the risk and hazard assessment, an excessively high force impact on a protective fence can be derived, the components of the protective fence are made stronger.
High torsional stiffness/stability
Elements consist of miter-welded profile frames (no open frame profiles) with welded or inserted infills
Pane installation
with clamping brackets, no gluing, easy pane replacement possible
Cutouts
with angle or clamping profile as edge protection
The robust safety fence system as a supplementary modular protective device in accordance with Machinery Directive 2006/42/EC, DIN EN ISO 12100, ISO 10218-1, ISO 10218-2, DIN EN ISO 13857, DIN EN ISO 14119 and DIN EN ISO 14120. It was primarily developed for safeguarding the hazardous areas of industrial robots, against impacts and material handling losses. "High Resistant" is designed for the increased risk of a mechanical collision of the robot arm with the guarding device and can be supplemented or combined with the FLEX and CustomLine Frame guarding systems in certain areas. If access is unavoidable in the high-risk areas protected by the "High Resistant" guarding system, Brühl offers special internal sliding doors and inward-opening hinged safety doors for this purpose.
Optimum stability
Force-fitted all-round weld seam for connecting base plate and post profile
Captivity of the fastening material
Fastening material remains with the screws on the grid elements
Mechanical stop
L-profile tabs on the inside of the upper protective fence area prevent a grille element panel from being pushed out
